FlexJet® Servo-Operated Pneumatic Actuators

FlexJet Pneumatic Servo ActuatorsUtilizing a single-coil design with 0-10 VDC input, this pneumatic FlexJet servo-actuator provides powerful position control up to 2” that is directly proportional to input voltage. An internal spring provides position feedback to the servo, resulting in exceptional control capabilities in a small package.

The 1-inch bore unit is available in .5-, 1.0-, 1.5- and 2-inch stroke lengths. Male and female threads (1/4-28 UNF) on each end are ready to accept a rod end or other bearing device.

1.5- and 2-inch bore actuators are also available.

FlexJet Pneumatic Product Ordering Guide

Performance Characteristics
Media Dry Air, Nitrogen
Flow Rate 0.8 SCFM @ 100 PSIG
Filtration 25 Micron Absolute
Temperature -20 F TO 160 F,
Using Dry Air, Nitrogen
Operating Pressure 80 TO 160 PSIG
Proof Pressure 250 PSIG.
Burst Pressure 425 PSIG
Coil Resistance 250 15 OHMS
Current +20mA / -20mA
Connectors #24 AWG Teflon Insulated Flying Leads, 14 Inches Min. Length